Bộ chống sét Ethernet RJ45 1000m FL45-1000
IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, FL45-1000 made by the high response surge arresters, the advantage allow clamping voltage and low loss against high speed signal, because it had a low capacitance. Designed to protect data communication lines in local and wide area networks up to 1000Base-TX transmission speeds.
FL45-1000 is designed by the theory of current limited and voltage clamped, discharged to ground. When the data line exist surge, the FL45-1000 is induced and worked ,the lightning energy is discharged to ground, and the high surge voltage is clamped to low level, so our devices is protected.

NOTHING
Standard: 10Base-T/100Base-TX/1000Base-TX standard
10/100/1000M signal: IEC6100-4-5 and ITU-TK20&21
Nominal discharge current(In):5 KA(8/20μS)
Working voltage: 0-5V
Limit voltage: ≤40V
Apply Band rate: 1000Mbps
Connector: RJ45 (F)
The line of protection: 4 lines (1, 2, 3, 6)
Insert consumption: ≤0.5dB
Delay time: ≤1ns
Working temperature:-20 to 60°C
Storage temperature:-25 to 85°C
Humidity: Relative humidity 5% to 95%
No power supply needed, No consumption
L×W×H: 72mm×42mm×25mm
Shell: Alnico
Color: Blue
Weight: 10g
Warranty: 3 years
Approvals: FCC, CE, RoHS approvals
Packing List
1. Ethernet Surge Protector FL45-1000×1
2. User manual ×1
| FL45-1000: |
| 1000M Ethernet RJ45 lightning protector, 4500V protection |
Tài liệu kỹ thuật chính thức của FL45-1000 — tải miễn phí, không cần đăng nhập.