Bộ chuyển đổi 1 cổng RS485/422 sang Ethernet Modbus Gateway GW1101-1D(RS-485)
GW1101-1D(RS-485) là bộ chuyển đổi Modbus Gateway công nghiệp, dùng để kết nối thiết bị RS-485/RS-422 với mạng Ethernet. Thiết bị hỗ trợ chuyển đổi Modbus RTU/ASCII sang Modbus TCP, phù hợp để tích hợp các thiết bị serial vào hệ thống mạng công nghiệp.
Sản phẩm có 1 cổng RS-485/RS-422 và 1 cổng Ethernet 10/100Mbps, hỗ trợ kết nối với PLC, đồng hồ đo, bộ điều khiển và các thiết bị Modbus khác. Khoảng cách truyền RS-485/RS-422 lên đến 1200m, đáp ứng nhu cầu kết nối thiết bị ở khoảng cách xa.
GW1101-1D(RS-485) hỗ trợ các chế độ RTU Master, RTU Slave, ASCII Master và ASCII Slave, tốc độ truyền serial từ 300bps đến 115200bps. Thiết bị cũng hỗ trợ cấu hình qua WEB và Telnet, giúp thiết lập và quản lý kết nối thuận tiện.
Thiết bị sử dụng vỏ kim loại, thiết kế không quạt, nguồn cấp 9~48VDC, cấp bảo vệ IP30 và nhiệt độ hoạt động -40~75°C. Thiết kế này phù hợp với môi trường tự động hóa và truyền thông công nghiệp.
Với khả năng kết nối RS-485/RS-422 với Ethernet và chuyển đổi giữa Modbus RTU/ASCII và Modbus TCP, sản phẩm phù hợp cho các ứng dụng tự động hóa, điều khiển máy móc, giám sát thiết bị và thu thập dữ liệu công nghiệp.

NOTHING
| Ethernet | Standard: 10Base-T, 100Base-TXProtocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS
Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 1 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaption |
| Serial Port | Standard: EIA RS-485, RS-422 Protocol: Modbus RTU/ASCII Quantity of serial port: 1 RS-485/422 serial port RS-485 signal: D+, D-, GND RS-422 signal: T+, T-, GND, R+, R- Baud rate: 110-115200bps Data bit: 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 2bit Interface form: adopt 5-pin 5.08mm pitch terminal blocks Flow control: RTS/CTS, DTR/DSR, XON/XOFF Directional control: RS-485 direction adopts Automatic Data Direction Control technology Pull high/low resistor for RS-485: 4.7kΩ Electromagnetic isolation strength: 3KVDC/2KVrms Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave Connection quantity: support up to 256 Modbus TCP client (master) accesses and connect up to 128 Modbus TCP server (slave) devices. |
| Configuration Method | WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration |
| Security | User right classification, IP address filtering, MAC address filtering, SNMP/ Mail /System Log alarm, HTTP/HTTPS/SSHD/TELNET access control |
| Indicator | Power supply indicator, running indicator, Ethernet port indicator, serial port indicator |
| Power Supply | 12~48VDC, 3-pin 5.08mm pitch terminal blocksPower supply nonpolarity |
| Power Consumption | No-load: 0.8W@12VDC Full-load: 0.8W@12VDC |
| Working Environment | Operating temperature: -40~75℃Storage temperature:-40~85℃
Relative humidity: 5%~95% (no condensation) |
| Physical Characteristic | Housing: IP40 protection, metalInstallation: wall mounting
Dimension (W x H x D): 97mm×110mm×25mm Weight: 0.3kg |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3 Air discharge: ±8kV Contact discharge: ±6kV IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3 IEC 61000-4-5 (Surge), Level 3 Shock: IEC 60068-2-27 |
| Certification | CE, FCC, RoHS |
1*RS-485/422 + 1*10/100Baes-T(X), single power supply 12-48VDC, wall-mounting
Tài liệu kỹ thuật chính thức của GW1101-1D(RS-485) — tải miễn phí, không cần đăng nhập.



